Home >
Xtreme Blue >
Xtreme Blue Upcut Roughing Router Bits - 3 Flute

Xtreme Blue Upcut Roughing Router Bits - 3 Flute

What is Xtreme Blue?

Forget what you know about coated compression cutters. Introducing an exclusive range designed just for MDF and all laminated panels. Longer lasting, higher heat resistance and better performance.

This exclusive new flagship range offers you unparalleled quality and technological advancements in your tooling requirements.

Xtreme Blue uses proprietary ultra-fine (0.001mm) nano-technology to apply a super-thin coating to titanium carbide. In comparison to uncoated compression cutters, Xtreme Blue cutters are 40 percent harder at 4200HV (versus 3000HV) and boast superior heat resistance to protect the blade from temperature.

In three independent trials, the Xtreme Blue coated compression cutters produced over twice as many boards than the uncoated solid carbide cutters before wearing out.

	Product Name	Price	Qty
	12 x 42 x 90 Z=3 Xtreme Blue Upcut Roughing Router ($104 ex. GST) V303.120.042.090XB (Pre Order)	Pre Order AUD$114.40
	12.7 x 42 x 90 Z=3 Xtreme Blue Upcut Roughing Router ($110 ex. GST) V303.127.042.090XB	AUD$121.00

Description: Details

Roughing router bits remove excess material during nesting applications, this allows for a finishing cutter to remove the remaining onion skin leaving a superb finish. Up cut refers to the direction of the flute.

As the router bit grooves, slots and cuts the chips are forced upwards. Therefore, the best finish is on the underside of the cut part. Up cut spirals are not recommended for softer materials such as MDF as the finish on the top surface is often ragged. Up-cut spirals can run at higher speeds but requires good quality suction on table to prevent material tug.

Three flute router bits have a smooth cutting action and a greater finish in harder materials. Three flute router bits last longer, run faster feed rates and are less susceptible to breaks than one and two flute router bits.
Downloads

Recently Viewed

Xtreme Blue Upcut Roughing Router Bits - 3 Flute

What is Xtreme Blue?

Details