Downcut Finishing Router Bits - 1 Flute

Finishing router bits produce a smooth and visually appealing surface finish on the material. They work best when following a roughing cutter.

Dimensions are displayed as diameter x cutting depth x overall length

	Product Name	Price	Qty
	6 x 22 x 60 Z=1 Downcut Finishing Router Bit (Ex GST $34.00) V101.060.022.060N (Only 6 left in stock)	AUD$37.40
	10 x 32 x 90 Z=1 Downcut Finishing Router Bit ($58 ex. GST) V101.100.032.090N (Only 5 left in stock)	AUD$63.80
	4 x 20 x 50 Z=1 Downcut Finishing Router Bit ($25 ex. GST) V101.040.020.050N (Only 18 left in stock)	AUD$27.50
	3 x 14 x 55 Z=1 Downcut Finishing Router Bit ($21 ex. GST) V101.030.014.055N (Only 15 left in stock)	AUD$23.10

Description: Details

Finishing router bits produce a smooth and visually appealing surface finish on the material. They work best when following a roughing cutter.

Down cut refers to the direction of the flute. As the router bit grooves, slots and cuts the chips are forced Downwards. Therefore, the best finish is on the topside of the cut part. The downwards chip flow also assists in holding the material in place. However, feed speeds should be reduced due to the increase of pressure on the tool.
Downloads

Recently Viewed

Details