Xtreme Blue Compression Chipbreaker Router Bit - 2 Wing

PRODUCT CODE V805.095.025.076XB
filler
$97.22
Chipbreaker router bits remove excess material during nesting applications, this allows for a finishing cutter to remove the remaining onion skin leaving a superb finish. They are not very different to finishing cutters except for the grooves in the cutting edge. These grooves cut off the chip being formed by the cutting edge, relieving pressure on the tool and allowing the hot chip to fly off into the dust extraction.

Compression cutters combine both and up cut and down cut spirals to force chips into the centre of the panel. The inwards pressure prevents chipping on either surface.

Two flute router bits have a smooth cutting action and a greater finish in harder materials.

Stock:
In stock

USED FOR

Volume Savings:

Xtreme Blue in Action

This is where coatings benefit your tools: 

  • Lower friction
  • Higher resistance to heat
  • Higher resistance to impact
  • Diffusion barrier between the tool and the chip
  • The nano-tech coating used in our Xtreme Blue cutters can withstand up to 1200C.

Forget what you know about coated router bits. Introducing an exclusive range designed just for MDF and all laminated panels.

Longer lasting, higher heat resistance and better performance, Xtreme Blue uses proprietary ultra-fine (0.001mm) nano-technology to apply a super-thin coating to titanium carbide. In comparison to uncoated router bits, Xtreme Blue cutters are 40 percent harder at 4200HV (versus 3000HV) and boast superior heat resistance to protect the cutting edge from temperature. In three independent trials, the Xtreme Blue coated compression cutters produced over twice as many boards than the uncoated solid carbide cutters before wearing out.

25% IMPROVEMENT IN PRODUCTION TIMES

Since we started using Xtreme Blue our replacement time has halved. The cutters last twice as long and produce a very clear cut. We can actually machine faster than before, so our production cycle times have sped up by 25 percent. Marius van der Walt, Head of Operations, Timberline Bathroom Products

You may also be interested in

Recently viewed