ISO30 Chuck

PRODUCT CODE CNC-TH-ISO30-CHUCK-ER40-BBN
filler
$236

The ISO Chuck is a non-stick tool holder with 7:24 taper. ISO30 receivers clamp down on the pull stud drawing pressure against the outer wall of the chuck.

The Taper

The taper allows a tightened grip as the chuck is pull further into the receiver as well as centring the tool in relation to the rotation of the router motor. Balanced rotation is critical when operating at speeds up to 24,000 RPM.

Ball Bearing Nut

Ball Bearing Nuts tighten easier and don't damage your collets. The part of the nut which contacts the collet is on a bearing and allows the collet to remain still whilst the nut is tightened onto it. This prevents the metal on metal rubbing which causes collet distortion.

Ball-bearing nuts improve concentricity, resulting in improved performance and longevity for your tools, chucks, collets and spindle.

Upgrade or replace your old nut today!

Stock:
In stock

USED FOR

Volume Savings:

Everything you NEED to know about Chucks and Ball Bearing Nuts

The ball bearing nut is a simple yet critical component of your tool holders. As opposed to the standard nut, the ball bearing prevents distortion in your spring collet. A standard nut imposes steel on steel contact between the collet and nut, whereas the inner flange of the ball-bearing nut sits on a ball race and remains stationary with the collet as the nut is tightened.

Customer Reviews

Based on 1 review Write a review

You may also be interested in

Recently viewed