Please email us any time on

Or give us a call: 1800 077 862

Your feedback and specific product queries are always welcome.

We are available from 9am-4pm AEST (excluding Australian Public Holidays)

If you are looking for something that is not on our website, and you are interested in purchasing by special order, please fill in your details and our customer service team will be in contact with you as soon as possible.

Frequently Asked Questions

Our router bits, tool holders, saw blades and turn over knives all come from Europe.

Tools should be replaced at the first sign of edge deterioration, to prevent further damage to toolholders.

It should be fed slowly enough so that it is not under significant strain or to slow to be subject to burning.

Do not use adaptor bushings to reduce the size of the collect.

The correct router must be used for its intended purpose or it may wear out

Router mechanism must also be checked regularly

Inspect tools for collet marks which indicates slipping or dust build up. Check collet for wear.

Collets should be replaced every 300-400 run hours.

Panel Tools Online offers new promotional deals each month. These deals will be advertised at the bottom of the page of relevant categories. If you want to inquire about bulk order deals, don’t hesitate to contact us via

Some items such as edge banding tooling and diamond profile cutters are not stocked due to their specialty requirements. Therefore, when ordering these items, you must allow time for the manufacturing and shipping from overseas suppliers. All other items which are not pre-order are stocked and will generally be despatched from our warehouse within 48 hours of the order being placed.

Most of the saw blades we stock are standardised sizes to fit common machines. The most critical measurement to check when purchasing a saw blade is the bore on the main blade (generally 30mm) and the bore on the scribe blade (generally 20 or 22mm).